| Hysteresis | ±0.05% |
|---|---|
| Measurement Range | 0-1000 Microstrain |
| Operational Temperature | -20～＋80℃ |
| Usage | Load Cell Sensor |
| Carrier Material | Phenolic Aldehyde/Polyimide/Epoxy |
| Histeresis | ±0,05% |
|---|---|
| Jarak pengukuran | 0-1000 Microstrain |
| Suhu operasional | -20 ̊+80°C |
| Penggunaan | Sel beban, sensor penimbangan pengukur regangan, sensor tekanan |
| Bahan Pembawa | Aldehid Fenolik/Polimida/Epoksi |
| Histeresis | ±0,05% |
|---|---|
| Jarak pengukuran | 0-1000 Microstrain |
| Suhu operasional | -20 ̊+80°C |
| Penggunaan | Sensor Sel Beban |
| Bahan Pembawa | Aldehid Fenolik/Polimida/Epoksi |
| Histeresis | ±0,05% |
|---|---|
| Jarak pengukuran | 0-1000 Microstrain |
| Suhu operasional | -20 ̊+80°C |
| Penggunaan | Sensor Sel Beban |
| Bahan Pembawa | Aldehid Fenolik/Polimida/Epoksi |
| Histeresis | ±0,05% |
|---|---|
| Jarak pengukuran | 0-1000 Microstrain |
| Suhu operasional | -20 ̊+80°C |
| Penggunaan | Sensor Sel Beban |
| Bahan Pembawa | Aldehid Fenolik/Polimida/Epoksi |
| Kisaran Suhu Dinilai | -10～+60 ℃ |
|---|---|
| Kepekaan | 2.0±0.05mV/V |
| Eksitasi maksimum | 15V |
| Resistensi keluaran | 700Ω±5Ω |
| Jenis Sel Beban | Sel beban balok gunting tunggal |
| Features | High Precision Good Performance |
|---|---|
| Mounting Type | Screw Mount |
| Compensated Temperature | -10℃-50℃ |
| Temperature Effect On Zero | ≤0.02%F.S./10℃ |
| Repeatability | ≤0.01%F.S. |
| Tipe pemasangan | Dudukan Sekrup |
|---|---|
| Suhu Kompensasi | -10 ℃ -50 ℃ |
| Efek Suhu pada Nol | ≤0,02%FS/10℃ |
| Fitur | Presisi tinggi, kinerja baik |
| Kemungkinan diulang | ≤0,01%FS |
